How to clean an engine?

Learn the appropriate methods to clean your engine


 
How to clean your engine?

Try CARBON CLEANING!


Decarbonization allows to clean your engine!


Preventive engine cleaning enables you to restore engine parts rather than replacing them, thereby saving vehicle owners on costly parts, such as a new turbocharger ($ 1.350 - 3.100), catalytic converter ($ 600 - 2.000), DPF ($ 600 - 2.000) or EGR valve ($ 370 - 500).

These problems result mainly from poor combustion, which stifles the engine.

So before replacing your engine parts, try Carbon Cleaning. A dirty engine as the result of carbon deposits is the new threat to vehicle performance.

 
Make your online diagnosis
Foreword

Like anything else, engines work better when they're clean. But cleaning an engine is not the same as cleaning the rest of your car. With the right procedure, you can keep your engine in tip-top shape. No need to hire a professional; you won't need anything you can't find lying around the house.
Find the good degreasing product

Degreasing products come in two types: solvent and water-based. Both types work on greasy engines. And both require special environmental handling once they’re applied—even if the label says “environmentally safe” or “biodegradable.” Because once the degreasing solution starts dissolving the grease, it’s considered hazardous waste.

We prefer solvent-based degreasers because they work faster and seem to cut through heavy grease buildup better than most water-based products. The downside is their strong solvent smell. If you’re sensitive to solvents, choose a concentrated water-based product instead.

To get better “cling” on vertical surfaces, choose either foam or a gel formula.
Methods to clean your engine

Degreasers work best when the grease is warm and soft. So start the engine and let it run for about five minutes. Then shut it off and let it cool down until you can safely touch the exhaust manifold. Never spray cleaners (especially flammable solvent types) on a hot engine.
 
If you’re using a concentrated water-based product, test it on a greasy spot. If it doesn’t cut the grease fast enough, add more concentrated degreaser to the brew.
Next, seal all the electrical connections. Then set the absorbent mats under the engine to soak up the runoff. Prep the worst areas. Then apply the degreaser. Aim carefully to prevent the overspray from reaching painted areas. Rinse lightly with water and remove the plastic wrap. When you’re done, place the wet mats in sunlight to allow the water to evaporate. Then dispose of the mats following local regulations.
 
For extra protection, spray an engine protectant.
Center Locator
Find the Carbon Cleaning center closest to you
With the Carbon Cleaning solution,
you can help extend the life of your car engine
without the need to replace so many expensive parts.
Locate a center
near you :
Professional
Become a distributor-partner of Carbon Cleaning
As a member of the Carbon Cleaning network,
you are an independent vendor. To help you grow
your business, we put all of our experience and expertise
at your disposal.
Contact us with any questions
or for more information about how to become a partner.
Professional Information and Contact
Already have a Carbon Cleaning Pro account? Sign in!
Become a franchise !
Does our franchise interest you ?
Are you looking for a unique, innovative and money making franchise ? Contact us here.
Become a franchise !